ACIQ N5H8T60*K*AAA*vsJohnson Controls THF2B60T21
Side-by-side heat pump comparison
ACIQ N5H8T60*K*AAA*
SEER2
15.5–17.5BTU/Wh
HSPF2
7.8–8.5BTU/Wh
Cooling Capacity
54000–57500BTU/hr
Refrigerant
R-454B
GWP 470 · Lower
Johnson Controls THF2B60T21
SEER2
15.2–16BTU/Wh
HSPF2
7.8–8.1BTU/Wh
Cooling Capacity
53000–57000BTU/hr
Refrigerant
R-410A
GWP 2088 · Higher
Key differences
ACIQ N5H8T60*K*AAA* is 9% more efficient at 17.5 BTU/Wh versus 16.0 BTU/Wh for the Johnson Controls THF2B60T21. The ACIQ N5H8T60*K*AAA* is larger at 57500 BTU/hr versus 57000 BTU/hr. ACIQ N5H8T60*K*AAA* uses a lower-impact refrigerant: R-454B (GWP 470) versus R-410A (GWP 2088). Overall, the ACIQ N5H8T60*K*AAA* sits higher in the category, ranking above 99% of certified air-source heat pumps.
Efficiency
| Spec | ACIQ | Johnson Controls |
|---|---|---|
| SEER2 (best combination)(BTU/Wh) | 17.5 | 16 |
| SEER2 (worst combination)(BTU/Wh) | 15.5 | 15.2 |
| HSPF2 (best combination)(BTU/Wh) | 8.5 | 8.1 |
| HSPF2 (worst combination)(BTU/Wh) | 7.8 | 7.8 |
| EER2 (best combination)(BTU/Wh) | 13 | 12 |
| COP at 5 °F | 2.34 | 2.46 |
Capacity
| Spec | ACIQ | Johnson Controls |
|---|---|---|
| Cooling Capacity (max)(BTU/hr) | 57500 | 57000 |
| Cooling Capacity (min)(BTU/hr) | 54000 | 53000 |
| Heating at 47 °F(BTU/hr) | 60000 | 59500 |
| Heating at 17 °F(BTU/hr) | 38500 | 39000 |
| Heating at 5 °F(BTU/hr) | 31800 | 32800 |
Configuration
| Spec | ACIQ | Johnson Controls |
|---|---|---|
| Product Type | HP - Split System | HP - Split System |
| Compressor Staging | Two-stage | Two-stage |
| Cold Climate Certified | No | No |
| Connected Capability | No | No |
| Series | 2-STAGE 18 SEER HP | LX SERIES |
| Indoor-Unit Combinations Rated | 117 | 185 |
Refrigerant
| Spec | ACIQ | Johnson Controls |
|---|---|---|
| Type | R-454B | R-410A |
| GWP Rating | R-454B (GWP:470 | Lower GWP) | R-410A (GWP:2088) |