ACIQ PHR524000K***K1vsBRYANT HEATING AND COOLING SYSTEMS 227TAN024**AA*
Side-by-side heat pump comparison
ACIQ PHR524000K***K1
SEER2
15.2BTU/Wh
HSPF2
7.2BTU/Wh
Cooling Capacity
22400BTU/hr
Refrigerant
R-410A
GWP 2088 · Higher
BRYANT HEATING AND COOLING SYSTEMS 227TAN024**AA*
SEER2
15.5BTU/Wh
HSPF2
7.8BTU/Wh
Cooling Capacity
22200BTU/hr
Refrigerant
R-410A
GWP 2088 · Higher
Key differences
Both models are closely matched on seer2: 15.2 vs 15.5 BTU/Wh. The ACIQ PHR524000K***K1 is larger at 22400 BTU/hr versus 22200 BTU/hr. Overall, the BRYANT HEATING AND COOLING SYSTEMS 227TAN024**AA* sits higher in the category, ranking above 10% of certified air-source heat pumps.
Efficiency
| Spec | ACIQ | BRYANT HEATING AND COOLING SYSTEMS |
|---|---|---|
| SEER2 (best combination)(BTU/Wh) | 15.2 | 15.5 |
| SEER2 (worst combination)(BTU/Wh) | 15.2 | 15.5 |
| HSPF2 (best combination)(BTU/Wh) | 7.2 | 7.8 |
| HSPF2 (worst combination)(BTU/Wh) | 7.2 | 7.8 |
| EER2 (best combination)(BTU/Wh) | 11.5 | 12 |
| COP at 5 °F | 1.90 | — |
Capacity
| Spec | ACIQ | BRYANT HEATING AND COOLING SYSTEMS |
|---|---|---|
| Cooling Capacity (max)(BTU/hr) | 22400 | 22200 |
| Cooling Capacity (min)(BTU/hr) | 22400 | 22200 |
| Heating at 47 °F(BTU/hr) | 23800 | 23800 |
| Heating at 17 °F(BTU/hr) | 13000 | 14300 |
| Heating at 5 °F(BTU/hr) | 8600 | — |
Configuration
| Spec | ACIQ | BRYANT HEATING AND COOLING SYSTEMS |
|---|---|---|
| Product Type | HP - Single Package | HP - Split System |
| Compressor Staging | Two-stage | Two-stage |
| Cold Climate Certified | No | No |
| Connected Capability | No | No |
| Series | Quiet Comfort HP | 2-STAGE 17 SEER HP |
| Indoor-Unit Combinations Rated | 1 | 1 |
Refrigerant
| Spec | ACIQ | BRYANT HEATING AND COOLING SYSTEMS |
|---|---|---|
| Type | R-410A | R-410A |
| GWP Rating | R-410A (GWP:2088) | R-410A (GWP:2088) |