Airquest N4H5S18*K*AAA*vsHitachi PAS-18BUFASDQ1
Side-by-side heat pump comparison
Airquest N4H5S18*K*AAA*
SEER2
15.2BTU/Wh
HSPF2
7.8BTU/Wh
Cooling Capacity
18000–18100BTU/hr
Refrigerant
R-410A
GWP 2088 · Higher
Hitachi PAS-18BUFASDQ1
SEER2
17.8–25BTU/Wh
HSPF2
9.4–11BTU/Wh
Cooling Capacity
18000BTU/hr
Cold Climate
Yes
Cold climate certified
Key differences
Hitachi PAS-18BUFASDQ1 is 39% more efficient at 25.0 BTU/Wh versus 15.2 BTU/Wh for the Airquest N4H5S18*K*AAA*. The Airquest N4H5S18*K*AAA* is larger at 18100 BTU/hr versus 18000 BTU/hr. Hitachi PAS-18BUFASDQ1 uses a lower-impact refrigerant: R-32 (GWP 675) versus R-410A (GWP 2088). Overall, the Hitachi PAS-18BUFASDQ1 sits higher in the category, ranking above 89% of certified air-source heat pumps.
Efficiency
| Spec | Airquest | Hitachi |
|---|---|---|
| SEER2 (best combination)(BTU/Wh) | 15.2 | 25 |
| SEER2 (worst combination)(BTU/Wh) | 15.2 | 17.8 |
| HSPF2 (best combination)(BTU/Wh) | 7.8 | 11 |
| HSPF2 (worst combination)(BTU/Wh) | 7.8 | 9.4 |
| EER2 (best combination)(BTU/Wh) | 12 | 15 |
| COP at 5 °F | — | 2.60 |
Capacity
| Spec | Airquest | Hitachi |
|---|---|---|
| Cooling Capacity (max)(BTU/hr) | 18100 | 18000 |
| Cooling Capacity (min)(BTU/hr) | 18000 | 18000 |
| Heating at 47 °F(BTU/hr) | 16700 | 20000 |
| Heating at 17 °F(BTU/hr) | 10400 | 17600 |
| Heating at 5 °F(BTU/hr) | — | 16200 |
Configuration
| Spec | Airquest | Hitachi |
|---|---|---|
| Product Type | HP - Split System | HP - Mini or Multi Split |
| Compressor Staging | Single stage | Continuously variable |
| Cold Climate Certified | No | Yes |
| Connected Capability | No | No |
| Series | PERFORMANCE 15 SEER2 HP | airCore700 |
| Indoor-Unit Combinations Rated | 2 | 6 |
Refrigerant
| Spec | Airquest | Hitachi |
|---|---|---|
| Type | R-410A | R-32 |
| GWP Rating | R-410A (GWP:2088) | R-32 (GWP:675 | Lower GWP) |