Kaden KOVH-42BAM152LvsTrane N5HP5042A1
Side-by-side heat pump comparison
Kaden KOVH-42BAM152L
SEER2
15.2BTU/Wh
HSPF2
7.8BTU/Wh
Cooling Capacity
41500BTU/hr
Refrigerant
R-454B
GWP 470 · Lower
Trane N5HP5042A1
SEER2
15.2–16BTU/Wh
HSPF2
7.8–8.1BTU/Wh
Cooling Capacity
38000–41000BTU/hr
Refrigerant
R-454B
GWP 470 · Lower
Key differences
Trane N5HP5042A1 is 5% more efficient at 16.0 BTU/Wh versus 15.2 BTU/Wh for the Kaden KOVH-42BAM152L. The Kaden KOVH-42BAM152L is larger at 41500 BTU/hr versus 41000 BTU/hr. Overall, the Trane N5HP5042A1 sits higher in the category, ranking above 14% of certified air-source heat pumps.
Efficiency
| Spec | Kaden | Trane |
|---|---|---|
| SEER2 (best combination)(BTU/Wh) | 15.2 | 16 |
| SEER2 (worst combination)(BTU/Wh) | 15.2 | 15.2 |
| HSPF2 (best combination)(BTU/Wh) | 7.8 | 8.1 |
| HSPF2 (worst combination)(BTU/Wh) | 7.8 | 7.8 |
| EER2 (best combination)(BTU/Wh) | 12 | 12 |
| COP at 5 °F | 2.30 | 2.28 |
Capacity
| Spec | Kaden | Trane |
|---|---|---|
| Cooling Capacity (max)(BTU/hr) | 41500 | 41000 |
| Cooling Capacity (min)(BTU/hr) | 41500 | 38000 |
| Heating at 47 °F(BTU/hr) | 40500 | 39000 |
| Heating at 17 °F(BTU/hr) | 24800 | 26200 |
| Heating at 5 °F(BTU/hr) | 20200 | 19900 |
Configuration
| Spec | Kaden | Trane |
|---|---|---|
| Product Type | HP - Split System | HP - Split System |
| Compressor Staging | Single stage | Single stage |
| Cold Climate Certified | No | No |
| Connected Capability | No | No |
| Series | KOVH152 | Advantage 15 Heat Pump |
| Indoor-Unit Combinations Rated | 4 | 72 |
Refrigerant
| Spec | Kaden | Trane |
|---|---|---|
| Type | R-454B | R-454B |
| GWP Rating | R-454B (GWP:470 | Lower GWP) | R-454B (GWP:470 | Lower GWP) |