605ENXB24000AA*
BRYANT HEATING AND COOLING SYSTEMS · HP - Single Package
15.2BTU/Wh
7.2BTU/Wh
22200BTU/hr
R-454B
BRYANT HEATING AND COOLING SYSTEMS 605ENXB24000AA*: SEER2 15.2 BTU/Wh, lower than 99% of air-source heat pumps (category median 20 BTU/Wh).
SEER2: worse than 99% of the 1781 comparable models within 10% of this capacity. Their median is 20 BTU/Wh.
Where this model sits
Lower than 99% of air-source heat pumps.
The BRYANT HEATING AND COOLING SYSTEMS 605ENXB24000AA* is a 22200 BTU/hr hp - single package using R-454B, a refrigerant with moderate global warming potential (GWP 470). At 15.2 BTU/Wh it ranks in the bottom 0% of the 12,218 certified air-source heat pumps models. Among similar-sized air-source heat pumps (within 10% of its size), it is less efficient than the peer median of 20 BTU/Wh. In this size range, comparable Midea models average 18.7 BTU/Wh and GREE models average 21 BTU/Wh.
Specifications
| Efficiency | |
|---|---|
| SEER2 (best combination) | 15.2BTU/Wh |
| SEER2 (worst combination) | 15.2BTU/Wh |
| HSPF2 (best combination) | 7.2BTU/Wh |
| HSPF2 (worst combination) | 7.2BTU/Wh |
| EER2 (best combination) | 11.5BTU/Wh |
| COP at 5 °F | 1.60 |
| Capacity | |
| Cooling Capacity (max) | 22200BTU/hr |
| Cooling Capacity (min) | 22200BTU/hr |
| Heating at 47 °F | 23400BTU/hr |
| Heating at 17 °F | 12000BTU/hr |
| Heating at 5 °F | 8400BTU/hr |
All 25 specifications
| Configuration | |
|---|---|
| Product Type | HP - Single Package |
| Compressor Staging | Two-stage |
| Cold Climate Certified | No |
| Connected Capability | No |
| Series | Preferred HP |
| Indoor-Unit Combinations Rated | 1 |
| Refrigerant | |
| Type | R-454B |
| GWP Rating | R-454B (GWP:470 | Lower GWP) |
| Identifiers | |
| Model Number | 605ENXB24000AA* |
| ENERGY STAR ID | ES_1020846_605ENXB24000AA*_03192025043013_28217154385 |
| Partner | Carrier Corporation |
| Date Certified | 2025-04-09 |
| Available From | 2025-04-21 |
| Markets | United States, Canada |
Documentation
We link to manufacturer documentation at its original source rather than rehosting it, so you always get the current revision.