GH5SAN531**AA*
BRYANT HEATING AND COOLING SYSTEMS · HP - Split System
15.2–16BTU/Wh
7.8–8BTU/Wh
27400–29400BTU/hr
R-454B
BRYANT HEATING AND COOLING SYSTEMS GH5SAN531**AA*: SEER2 16 BTU/Wh, lower than 85% of air-source heat pumps (category median 20 BTU/Wh).
SEER2: worse than 87% of the 1132 comparable models within 10% of this capacity. Their median is 20.2 BTU/Wh.
Where this model sits
Lower than 85% of air-source heat pumps.
The BRYANT HEATING AND COOLING SYSTEMS GH5SAN531**AA* is a 29400 BTU/hr hp - split system using R-454B, a refrigerant with moderate global warming potential (GWP 470). At 16 BTU/Wh it ranks in the bottom 14% of the 12,218 certified air-source heat pumps models. Among similar-sized air-source heat pumps (within 10% of its size), it is less efficient than the peer median of 20.2 BTU/Wh. In this size range, comparable Midea models average 21 BTU/Wh and MDV models average 22.5 BTU/Wh.
Specifications
| Efficiency | |
|---|---|
| SEER2 (best combination) | 16BTU/Wh |
| SEER2 (worst combination) | 15.2BTU/Wh |
| HSPF2 (best combination) | 8BTU/Wh |
| HSPF2 (worst combination) | 7.8BTU/Wh |
| EER2 (best combination) | 13BTU/Wh |
| COP at 5 °F | 2.06 |
| Capacity | |
| Cooling Capacity (max) | 29400BTU/hr |
| Cooling Capacity (min) | 27400BTU/hr |
| Heating at 47 °F | 30600BTU/hr |
| Heating at 17 °F | 18200BTU/hr |
| Heating at 5 °F | 14000BTU/hr |
All 25 specifications
| Configuration | |
|---|---|
| Product Type | HP - Split System |
| Compressor Staging | Single stage |
| Cold Climate Certified | No |
| Connected Capability | No |
| Series | 15 SEER2 HP |
| Indoor-Unit Combinations Rated | 41 |
| Refrigerant | |
| Type | R-454B |
| GWP Rating | R-454B (GWP:470 | Lower GWP) |
| Identifiers | |
| Model Number | GH5SAN531**AA* |
| ENERGY STAR ID | ES_1020846_GH5SAN531**AA*_08232025013914_28217683628 |
| Partner | Carrier Corporation |
| Date Certified | 2026-06-29 |
| Available From | 2025-07-31 |
| Markets | United States, Canada |
Documentation
We link to manufacturer documentation at its original source rather than rehosting it, so you always get the current revision.