PH5SAN436**AA*
BRYANT HEATING AND COOLING SYSTEMS · HP - Split System
15.5BTU/Wh
7.8BTU/Wh
34600BTU/hr
R-410A
BRYANT HEATING AND COOLING SYSTEMS PH5SAN436**AA*: SEER2 15.5 BTU/Wh, lower than 89% of air-source heat pumps (category median 20 BTU/Wh).
SEER2: worse than 92% of the 1850 comparable models within 10% of this capacity. Their median is 19 BTU/Wh.
Where this model sits
Lower than 89% of air-source heat pumps.
The BRYANT HEATING AND COOLING SYSTEMS PH5SAN436**AA* is a 34600 BTU/hr hp - split system using R-410A, a refrigerant with high global warming potential (GWP 2088). At 15.5 BTU/Wh it ranks in the bottom 10% of the 12,218 certified air-source heat pumps models. Among similar-sized air-source heat pumps (within 10% of its size), it is less efficient than the peer median of 19 BTU/Wh. In this size range, comparable Midea models average 20 BTU/Wh and TOSOT models average 21 BTU/Wh.
Specifications
| Efficiency | |
|---|---|
| SEER2 (best combination) | 15.5BTU/Wh |
| SEER2 (worst combination) | 15.5BTU/Wh |
| HSPF2 (best combination) | 7.8BTU/Wh |
| HSPF2 (worst combination) | 7.8BTU/Wh |
| EER2 (best combination) | 12.5BTU/Wh |
| Capacity | |
| Cooling Capacity (max) | 34600BTU/hr |
| Cooling Capacity (min) | 34600BTU/hr |
| Heating at 47 °F | 33800BTU/hr |
| Heating at 17 °F | 20200BTU/hr |
All 23 specifications
| Configuration | |
|---|---|
| Product Type | HP - Split System |
| Compressor Staging | Single stage |
| Cold Climate Certified | No |
| Connected Capability | No |
| Series | 15 SEER2 HP |
| Indoor-Unit Combinations Rated | 1 |
| Refrigerant | |
| Type | R-410A |
| GWP Rating | R-410A (GWP:2088) |
| Identifiers | |
| Model Number | PH5SAN436**AA* |
| ENERGY STAR ID | ES_1020846_PH5SAN436**AA*_08032023014047_6887253 |
| Partner | Carrier Corporation |
| Date Certified | 2023-08-21 |
| Available From | 2022-07-01 |
| Markets | United States, Canada |
Documentation
We link to manufacturer documentation at its original source rather than rehosting it, so you always get the current revision.