A-KCD30SA-1
KERR · HP - Split System
15.2–16.2BTU/Wh
8.5–9.7BTU/Wh
29000–30000BTU/hr
Yes
KERR A-KCD30SA-1: SEER2 16.2 BTU/Wh, lower than 80% of air-source heat pumps (category median 20 BTU/Wh).
SEER2: worse than 81% of the 1215 comparable models within 10% of this capacity. Their median is 20 BTU/Wh.
Where this model sits
Lower than 80% of air-source heat pumps.
The KERR A-KCD30SA-1 is a 30000 BTU/hr hp - split system using R-410A, a refrigerant with high global warming potential (GWP 2088). At 16.2 BTU/Wh it ranks in the bottom 20% of the 12,218 certified air-source heat pumps models. Among similar-sized air-source heat pumps (within 10% of its size), it is less efficient than the peer median of 20 BTU/Wh. In this size range, comparable Midea models average 21 BTU/Wh and MDV models average 22.4 BTU/Wh.
Specifications
| Efficiency | |
|---|---|
| SEER2 (best combination) | 16.2BTU/Wh |
| SEER2 (worst combination) | 15.2BTU/Wh |
| HSPF2 (best combination) | 9.7BTU/Wh |
| HSPF2 (worst combination) | 8.5BTU/Wh |
| EER2 (best combination) | 10.5BTU/Wh |
| COP at 5 °F | 1.85 |
| Capacity | |
| Cooling Capacity (max) | 30000BTU/hr |
| Cooling Capacity (min) | 29000BTU/hr |
| Heating at 47 °F | 33000BTU/hr |
| Heating at 17 °F | 22600BTU/hr |
| Heating at 5 °F | 27000BTU/hr |
All 25 specifications
| Configuration | |
|---|---|
| Product Type | HP - Split System |
| Compressor Staging | Continuously variable |
| Cold Climate Certified | Yes |
| Connected Capability | No |
| Series | A Series |
| Indoor-Unit Combinations Rated | 4 |
| Refrigerant | |
| Type | R-410A |
| GWP Rating | R-410A (GWP:2088) |
| Identifiers | |
| Model Number | A-KCD30SA-1 |
| ENERGY STAR ID | ES_17771_A-KCD30SA-1_06252025023036_28217542269 |
| Partner | Kerr Controls, Limited |
| Date Certified | 2026-06-09 |
| Available From | 2025-06-24 |
| Markets | United States, Canada |
Documentation
We link to manufacturer documentation at its original source rather than rehosting it, so you always get the current revision.