BRYANT HEATING AND COOLING SYSTEMS 227TAN036**AA*vsXTRON XH36LCA2DI-19US
Side-by-side heat pump comparison
BRYANT HEATING AND COOLING SYSTEMS 227TAN036**AA*
SEER2
15.5BTU/Wh
HSPF2
7.8BTU/Wh
Cooling Capacity
33800BTU/hr
Refrigerant
R-410A
GWP 2088 · Higher
XTRON XH36LCA2DI-19US
SEER2
20BTU/Wh
HSPF2
8.6BTU/Wh
Cooling Capacity
33600BTU/hr
Cold Climate
Yes
Cold climate certified
Key differences
XTRON XH36LCA2DI-19US is 23% more efficient at 20.0 BTU/Wh versus 15.5 BTU/Wh for the BRYANT HEATING AND COOLING SYSTEMS 227TAN036**AA*. The BRYANT HEATING AND COOLING SYSTEMS 227TAN036**AA* is larger at 33800 BTU/hr versus 33600 BTU/hr. XTRON XH36LCA2DI-19US uses a lower-impact refrigerant: R-32 (GWP 675) versus R-410A (GWP 2088). Overall, the XTRON XH36LCA2DI-19US sits higher in the category, ranking above 65% of certified air-source heat pumps.
Efficiency
| Spec | BRYANT HEATING AND COOLING SYSTEMS | XTRON |
|---|---|---|
| SEER2 (best combination)(BTU/Wh) | 15.5 | 20 |
| SEER2 (worst combination)(BTU/Wh) | 15.5 | 20 |
| HSPF2 (best combination)(BTU/Wh) | 7.8 | 8.6 |
| HSPF2 (worst combination)(BTU/Wh) | 7.8 | 8.6 |
| EER2 (best combination)(BTU/Wh) | 11.7 | 10.1 |
| COP at 5 °F | — | 2 |
Capacity
| Spec | BRYANT HEATING AND COOLING SYSTEMS | XTRON |
|---|---|---|
| Cooling Capacity (max)(BTU/hr) | 33800 | 33600 |
| Cooling Capacity (min)(BTU/hr) | 33800 | 33600 |
| Heating at 47 °F(BTU/hr) | 35000 | 34000 |
| Heating at 17 °F(BTU/hr) | 21600 | 23600 |
| Heating at 5 °F(BTU/hr) | — | 23800 |
Configuration
| Spec | BRYANT HEATING AND COOLING SYSTEMS | XTRON |
|---|---|---|
| Product Type | HP - Split System | HP - Mini or Multi Split |
| Compressor Staging | Two-stage | Continuously variable |
| Cold Climate Certified | No | Yes |
| Connected Capability | No | No |
| Series | 2-STAGE 17 SEER HP | C-Series |
| Indoor-Unit Combinations Rated | 1 | 1 |
Refrigerant
| Spec | BRYANT HEATING AND COOLING SYSTEMS | XTRON |
|---|---|---|
| Type | R-410A | R-32 |
| GWP Rating | R-410A (GWP:2088) | R-32 (GWP:675 | Lower GWP) |