CHAMPION HEATING AND COOLING XH618E2S11vsLennox VPC018H4M-3P*
Side-by-side heat pump comparison
CHAMPION HEATING AND COOLING XH618E2S11
SEER2
15.2–16BTU/Wh
HSPF2
7.8–8BTU/Wh
Cooling Capacity
17000–18300BTU/hr
Refrigerant
R-454B
GWP 470 · Lower
Lennox VPC018H4M-3P*
SEER2
17.1–19.2BTU/Wh
HSPF2
8.8–9.4BTU/Wh
Cooling Capacity
18200BTU/hr
Refrigerant
R-410A
GWP 2088 · Higher
Key differences
Lennox VPC018H4M-3P* is 17% more efficient at 19.2 BTU/Wh versus 16.0 BTU/Wh for the CHAMPION HEATING AND COOLING XH618E2S11. The CHAMPION HEATING AND COOLING XH618E2S11 is larger at 18300 BTU/hr versus 18200 BTU/hr. CHAMPION HEATING AND COOLING XH618E2S11 uses a lower-impact refrigerant: R-454B (GWP 470) versus R-410A (GWP 2088). Overall, the Lennox VPC018H4M-3P* sits higher in the category, ranking above 36% of certified air-source heat pumps.
Efficiency
| Spec | CHAMPION HEATING AND COOLING | Lennox |
|---|---|---|
| SEER2 (best combination)(BTU/Wh) | 16 | 19.2 |
| SEER2 (worst combination)(BTU/Wh) | 15.2 | 17.1 |
| HSPF2 (best combination)(BTU/Wh) | 8 | 9.4 |
| HSPF2 (worst combination)(BTU/Wh) | 7.8 | 8.8 |
| EER2 (best combination)(BTU/Wh) | 12.5 | 12.5 |
| COP at 5 °F | 2.34 | 1.60 |
Capacity
| Spec | CHAMPION HEATING AND COOLING | Lennox |
|---|---|---|
| Cooling Capacity (max)(BTU/hr) | 18300 | 18200 |
| Cooling Capacity (min)(BTU/hr) | 17000 | 18200 |
| Heating at 47 °F(BTU/hr) | 17000 | 20000 |
| Heating at 17 °F(BTU/hr) | 11300 | 14300 |
| Heating at 5 °F(BTU/hr) | 9100 | 12300 |
Configuration
| Spec | CHAMPION HEATING AND COOLING | Lennox |
|---|---|---|
| Product Type | HP - Split System | HP - Mini or Multi Split |
| Compressor Staging | Single stage | Continuously variable |
| Cold Climate Certified | No | No |
| Connected Capability | No | No |
| Series | LX SERIES | Lennox Real |
| Indoor-Unit Combinations Rated | 272 | 3 |
Refrigerant
| Spec | CHAMPION HEATING AND COOLING | Lennox |
|---|---|---|
| Type | R-454B | R-410A |
| GWP Rating | R-454B (GWP:470 | Lower GWP) | R-410A (GWP:2088) |